Oscilloscope DIY Kit DSO138 Sudah Disolder

Oscilloscope DIY Kit DSO138 Sudah Disolder
https://1.bp.blogspot.com/-jlu-lSifZiU/XwR-UWnZFvI/AAAAAAAACDU/1z3ZUol_XKcAH_XA99EOubKdcCDbBjxDQCLcBGAsYHQ/s72-c/Oscilloscope%2BDIY%2BKit%2BDSO138%2BSudah%2BDisolder.jpg

TOKO MARGA SETIA SURVEY
Berdagang alat- alat Kelautan, Alat Selam, Perahu Karet,Alat Keselamatan,
GPS Garmin, GPS Magellan, Alat Survey, Alat Ukur dan Aksesoris Alat Ukur.
Current Meter.Anemometer ,Anemometer Wireless,Weather station
Untuk keterangan, nego harga dan informasi produk lainnya, hubungi :
Name       : tatang survey
Alamat      : Jl .H.Kelik No.20 RT.03 / RW.08 Kelapa Dua Kebon Jeruk Jakarta Barat
Email        : tatangms409@gmail.com
Telp          : 082124100046/ 083892207786
WhatsApp  :082124100046

Catatan:
-Versi yang sudah tersolder. Siap pakai
-Customer diharapkan mempunyai dasar elektronika. Kami tidak memberikan konsultasi pemasangan



===
Features:
Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board.
Available source, Capable people can be secondary development on the basis of the suite, for example, it can be changed to Millivoltmeter, data loggers, and so on (we don't supply any technical support about that).
Circuit is simple and the kit is inexpensive

Description:

PCB size: 117 x 76mm
Screen size: 52 x 40mm
Supply voltage: DC 9V

Characteristics of indicators:

Maximum real-time sampling rate: 1Msps
Accuracy: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0 - 200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Adjustable vertical displacement, and with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling modes: DC / AC / GND
The horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
With automatic, regular and one-shot mode, easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position, and with instructions
Observable previous trigger waveform (negative delay)
Can freeze at any time waveform display (HOLD function)
Comes 1Hz /3.3V square wave test signal source


Note:
This version SMD is soldered, is much easier than 13804K version.
This is an unassembled kit, customers should have some basic electronic activity and ability, because of different levels of ability, we can not guarantee that everyone can DIY success
Share this product :

Posting Komentar

 
Support : Creating Website | Tatang Survey | Redesigned :Tatang Survey
Copyright © 2011. Nandar Marga Setia Survey - All Rights Reserved
Margasetia Created by Creating Website Published by tatang survey
Proudly powered by Blogger